| Modello | Rapporto | Passo | Lettura dopo 1 giro m/m | Velocità max m/m | MISURE DI INGOMBRO | 3D | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A mm | B mm | C mm | D mm | E mm | F mm | G mm | h mm | I mm | ||||||
| DG33 | 1:05 | 0.5 | 0005 | 500 | 33 | 42 | 22 | Ø6 | 6.5 | Ø26 | 24 | 7.5 | Ø20 | |
| DG33 | 1:10 | 1 | 0010 | 300 | ||||||||||
| DG33 | 1:15 | 1.5 | 0015 | 300 | ||||||||||
| DG33 | 1:20 | 2 | 0020 | 300 | ||||||||||
| DG33 | 1:25 | 2.5 | 0025 | 300 | ||||||||||
| DG33 | 1:30 | 3 | 0030 | 300 | ||||||||||
| DG33 | 1:40 | 4 | 0040 | 200 | ||||||||||
| DG33 | 1:50 | 5 | 0050 | 200 | ||||||||||
| DG33 | 1:60 | 6 | 0060 | 200 | ||||||||||
| DG33 | 1:100 | 10 | 0100 | 150 |
NOTE:
For certain minimum quantities, other ratios and 15 mm spacer available upon request.
Mounting position
| Use | Revolution | Counter | Bushing | Lock pin | Strip |
|---|---|---|---|---|---|
| Instrument to adjust and directly read a motion (or an angle) obtained by a drive shaft rotation. | 0 = clockwise, increasing values. S = anti-clockwise, increasing values. |
4 digits (three black and one red to indicate the decimal), digit height 4.5 mm. | Burnished steel, hole 14 H7. Reduction bushes D.10-12 are available. |
D.6 locks instrument whilst shaft rotates. | Black polyurethane, included. |
MOUNTING
Set the instrument on the inner (zero) value, then block the security dowel.
| ORDERING EXAMPLE | |||||
|---|---|---|---|---|---|
| Model | Pitch | Revolution | Bushing | View | Color |
| DG33 | 1 | S | 14 | A | Black |
Richiedi preventivo
Hai bisogno di ricevere maggiori informazioni sui nostri prodotti?
Compila il form, il nostro incaricato ti risponderà al più presto.
Prodotti simili
DG49
Position indicator
Black or orange thermoplastic.
Digital position indicator with direct drive.
RG89
Position indicator
Black thermoplastic.
Digital mechanic indicator with direct drive.
RE96
Position indicator
Black thermoplastic.
Digital mechanic indicator, direct drive and zero-setting screw.
M20/1
Picks counter without zero-setting
-
4 digits, height 4.5 mm – shaft D.3 mm – unilateral drive. Revolution: 0 = clockwise, S = anti-clockwise. Maximum speed: 300 beats per minute. Dimensions: 20x21x32. Material: alloy or fiberglass gear.
